CIRCUTOR PowerStudio Series - Manual (Page 77)

PowerStudio
User Manual 77
1.18.- RS232/485 CONVERTER
The RS232/485 converter connects equipment which works with an RS-485 serial connection to
the port of the PC with an RS-232 connection.
When adding or modifying this device, see ‘Editor Manual’, the following dialogue appears
Where
• Name: Alphanumeric field that uniquely identifies the device throughout the program. There
are no two devices in the configuration with the same name.
• Description: Alphanumeric type data to enter a brief description of the device.
• Port: Number of the serial port that the program uses for communication with the device.
• Advanced communication: Permits the configuration of a series of additional parameters on
the device. Refer to ‘Editor manual’.