2 inputs, Inputs – CIRCUTOR PowerStudio Series User Manual
Page 198
PowerStudio PowerStudio
198 User Manual
1.49.1.2 Inputs
For each of the LM50-TCP inputs three variables will be available, a digital one to show the
input status (open / closed), a counter variable to show the number of pulses detected in the input and
finally a flow variable calculated by the software as an estimate of the pulse frequency that occurs in
the input during a period of time.
By means of this dialogue the LM50-TCP input can be configured,
Using the
display configuration of the different types of variables can
be configured. The previous image shows the configuration of the counters, where:
• Description: Alphanumeric type which permits a brief description of the counter so it
can be identified better.
• Unit: Alphanumeric type data which permits a brief description of the units where the
counter is displayed to be entered.
• Factor: Multiplier value of each input pulse.