Gasboy 03908X - Manual (Page 11)

MDE-4351A Gasboy ATC Kits 039086 and 039087 Installation Manual • February 2006 Page 11
Installation
Figure 6: C06391 9800 CPU Printed Circuit Board (Photograph)
Figure 7: C06391 9800 CPU Printed Circuit Board (Drawing)
14 In the kit, locate the W284 Pulser/Handle Ribbon Cable (see Figure 1 for identity).
15 Connect one end of the W284 cable to P1 on the 461A2 board ( Figure 8 ) and the other end to
P2 in the LP-70 Polycase box ( Figure 9 ).
16 Connect one end of the second W284 cable to P8 on the 461A2 board ( Figure 8 ) and the other
end to P3 in the LP-70 Polycase box ( Figure 9 ).
Note: Be sure the cables are connected to the connectors as follows:
P1 of 461A2 to P2 of LP-70 Polycase box
P8 of 461A2 to P3 of LP-70 Polycase box
Pulser 1 and
Handles Jacks
Pulser 2 Jack
LCD
Display
Jack
Pulser 1 and
Handles Jacks
Pulser 2 Jack
LCD
Display
Jack