Gasboy CFN Series SCII Start-Up Manual - Manual (Page 16)

CFN Series System
2-4 03/07/03
5. LOAD PRODUCT - FUELS (Reference: Site Manager's Manual, LO PRO command)
Use the following table to list the site's fuel products. Use one product code for each
different fuel product. These product codes can be linked to authorization codes when used
with private-issue cards. They are also used to assign products to tanks and pumps. In
addition to the product code, category, and name, three other prompts appear when you
execute this command: minimum price, maximum price, and tax. These should all be set to
zero for fuel products. If you need additional space, photocopy this chart.
PRODUCT
CODE
PRODUCT
CATEGORY
PRODUCT
NAME
NOTE: Fuel categories are usually 1 or 1 and 2.
6. LOAD FUEL INVENTORY (Reference: Site Manager's Manual, LO IN command)
Use the following table to load the initial inventory amounts and the reorder levels for your
fuel products. Once you have loaded the initial inventory amounts, you will use ADd
INventory to add to the inventory amount for the product. You will also use this command
later when you load inventory for your merchandise products, but you need to define these
products first.
NOTE: Normally fuel is tracked using the LOad TAnk command; however, this command
can also be used.
PRODUCT
NUMBER
QUANTITY REORDER
LEVEL