Mathey Dearman CNC Saddle Machine - Manual (Page 102)

CNC Saddle Machine Parts & Operating Manual 03-0117-MSA 03-0117-1SA 03-0117-2SA Ver 1.0
102
6.7.18 Lead In / Out Work or Drop (Figure 6-61)
Figure 6-61 Lead In/Out – Work or Drop Screen
1. “A” Selection –This is the standard selection, the lead in/out will be in the positive z direction. The
purpose of this option is for the pierce to be on the piece that is on the far side of the cutter.
2. “B” Selection – This is the standard selection, the lead in/out will be in the negative z direction. The
purpose of this option is for the pierce to be on the piece the machine is resting on.
3. Back Button – Go to the previous cut selection screen.
4. Next Button – Go to the next cut selection screen.
A B