Nevion Multicon MRP - Manual (Page 36)

Modular Routing Protocol - MRP Rev. L
nevion.com | 36
9
Deprecated commands
These commands are no longer used for new products.
9.1 Request Crosspoint Locking Status
— Single Destination
This command requests the locking cross point status of a specific destination on a specific
level.
Command
si l<level1> <dest1> [[l<level1>] <dest1>] [*CC]<LF><LF>
Response
%<LF>
xl l<level> <src> <dest> <lock> <group no><LF>
[xl l<level> <src> <dest> <lock> <group no><LF> …]
[*CC<LF>]
<LF>
9.2 Router list
This command is used to request a list over all routers in the system.
Command:
rlist<LF><LF>
Response:
? "rlist" <LF>
r<rno> <size> "<router description>"<LF>
[r<rno> …]
[*CC<LF>]
<LF>
9.3 Router partition list
This command is used to get the list of partitions of all routers in a system. A partition is the
link between a router and a level.
Command
plist<LF><LF>
Response
? "plist" <LF>
r<rno> p<pno> l<level> "<description>" <lIn>:<pIn>
<lOut>:<pOut><LF>
[r<rno> p<pno> l<level> …]
[*CC<LF>]
<LF>