Nevion Multicon MRP User Manual
Page 41
Modular Routing Protocol - MRP
Rev. L
nevion.com | 41
Response:
? "<command>"<LF>
[out b<busno> m<module> <output>
[rcl={enabled|locked|locked,autobypass|
autobypass|bypass|mute}]
[br=<bitrate>]
[asi={enabled|disabled}]
[sr={auto|sd|hd}]
<LF>]
[out ...]
[*CC<LF>]
<LF>
Where:
<busno>
Bus number.
<module>
Module number.
<output>
Output number. Starts at 0 and increases to the router size
– 1.
rcl
Reclocker configuration and status.
enabled
The output is configured to enable the reclocker, but it is
not locked.
locked
The output is configured to enable the reclocker, and it is
locked.
Locked,
autobypass
The output is configured to bypass the reclocker when it's
not locked. It is now locked.
autobypass
The output is configured to bypass the reclocker when it's
not locked, which it isn't.
bypass
The output is configured to bypass the reclocker.
mute
The output is configured to mute.
br
When the reclocker is locked this option is showing the bitrate it is locked
to.
asi
Prevents a false lock to 177Mb/s when using DVB/ASI.
enabled
Prevents the reclocker to lock at 177Mb/s.
disabled
Makes it possible for the reclocker to lock at 177Mb/s.
sr
Shows the slew rate the cable driver is configured to use.
auto
The slew rate is selected automatically.
sd
The output will meet the SMPTE 259M rise/fall time
specifications.
hd
The output will meet the SMPTE 292M rise/fall time
specifications.