QuickLabel Kiaro! - Manual (Page 43)

Quick Start Guide
Kiaro! User Guide 27
3 Select Astro-Med IncQuickLabel Kiaro and choose Properties . The Properties
window will open. Choose the General tab.
4 Choose Change Settings . Then choose the Driver tab.
5
Choose
Update Driver
. When you are prompted, select the
Search automatically
for updated driver software option. Windows will locate the driver on your
system and create a printer item.
Installing the Printer Driver (Network)
Use the following instructions to install the printer via a network connection on
Windows XP, Windows Vista, Windows 7, or Windows 8.
For detailed information about the topic of networking, refer to documentation
applicable to your network environment and/or contact your network administrator.
The printer uses the following ports: TCP 50000,50001,9100, UPD 50001,50002. The
printer cannot be used on a network where other devices on the network use the same
ports.
Note: When the Windows logo testing, publisher verification, or digital signing warning
messages appear, choose to continue the installation. These messages indicate that the driver has
not been “logo tested” by Microsoft. However, it has been tested thoroughly by QuickLabel