Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 157)

Kayenne XL Package — User Manual 155
Half M/E
Figure 97. Machine Control Module Detail 4
• Goto 
Numeric Timecode entry. To cue to an IN or OUT mark, hold the Goto
button and press the related Mark In resp. Mark Out button.
• Mark In/Out 
Opens the numeric keypad with actual timecode displayed, which can
be confirmed or overwritten with a numeric entry. The default value for
the new mark is the current timecode position of the loaded clip.

In addition the numeric keypad contains an entry to clear/reset the IN
or OUT mark. Use SOM (start of material) to clear the IN and EOM (end
of material) to clear the OUT mark.
Figure 98. Machine Control Modul Detail 5
Indicates an activated Loop and/or Breakout-Mode. An activated Breakout
can be overruled with this button, once activated for a loaded clip inside a
RamRecorder channel.
Note These two buttons are currently only operational when the module is dele-
gated to a RamRecorder channel.