Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 580)

578 Kayenne XL Package — User Manual
Section 4 — Sidepanel Menu Summaries
• Set to Default: You can either default the parameters of the Transform
subpage only or all parameters of a channel. For a complete start from
scratch buttons are added to default all channels by one button press.
• Set DPM-Loop "On" & "Linear Key": These buttons display the current state
of the (iDPM only) keyers of the according DPM channels. When the
buttons are enabled, the state differs from what is normally necessary
to key properly. Pressing the buttons enables the DPM-Loop of the keyer
and sets the key mode to Linear Key.
• Set Near/Far Key Source "White": When you use the DPM channel to
manipulate a full frame image you should key on White. Pressing the
buttons sets the key source for near and far to White.
If you are not familiar with the difference between front/back versus
near/far please see
Front and Back, Near and Far on page 63 .