Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 505)

Kayenne XL Package — User Manual 503
RamRecorder Menu
• Go To .. 
The Goto button can be used to position the selected RamRecorder 
channels.
Figure 413. RamRecorder Status Go To
• Begin: Moves clip to the beginning.
• End: Moves clip to the end.
• Timecode: Moves clip to the entered timecode. 
A popup appears to enter the timecode value
• Mark In: Moves clip to the Mark-In preset.
• Mark Out: Moves clip to the Mark-Out preset.
•
• Settings 
To configure the RamRecorder channels, touch the Settings button on
the top and select the desired parameter.
Figure 414. RamRecorder Status Settings
• Bounce: 
The Bounce function is only available if the RamRecorder is in Clip-
mode or in a Loop mode. Bounce is not available in Normal VTR-
Mode! If bounce is activated and the Playout reaches its end posi-
tion then it runs in reverse to Mark In, and when it reaches Mark-In
it runs forward to Mark Out. This is repeated until the loop's exit
criteria is reached.
• Loops: 
Loops is used only if a RamRec Channel is in a Loop mode to
specify the number of loops to be executed (value 0 = endless).
Bounce