Grass Valley Kayenne XL Package v.7.0.4 User Manual
Page 335
Kayenne XL Package — User Manual
333
Install Menu
Fader Calibration
Adjustment of the fader end position values. Lower end position: 0%
signal, Upper end position: 100% signal.
End position means: Move the fader gently as far as it will go. During fader
adjustment moving the fader does not affect video signals.
1.
Press Start Fader Calibration. Instructions for the calibration procedure
will now be shown in the display at the Transition Control Panel.
2.
Move all faders to the lower end position and press the Auto button at
the Transition Control Panel.
3.
Move all faders to the upper end position and press the Auto button
again, and the Fader Calibration is done.
Joystick Calibration
1.
Press Start Joystick Calibration. Instructions for the calibration procedure
will now be shown in the display at the Multi Function Module.
2.
Move the Joystick to bottom right corner and turn the joystick right end
stop and press the Next button at the Multi Function Module.
3.
Release the joystick that it returns to its center position and press the
Next button again.
4.
Move the joystick to top left corner and turn the joystick to the left end
stop and press the End button. The joystick is now calibrated