Grass Valley PROFILE FAMILY v.2.5 - Manual (Page 188)

Chapter 4 Using VdrPanel
188 Profile Family
If you have minimized the panels, you can arrange the icons with:
• Choose Window | Arrange Icons .
Viewing Record Capacity
The Record Capacity dialog box shows the amount of recording time remaining
on the current media disk volume according to the current compression presets.
To view the recording capacity:
1. Click a panel to make it active.
2. Choose Window | Record Capacity . A message box appears (Figure 89). In
this instance, the message box shows the internal disks labeled INT:. The
recording time remaining is represented in Hours:Minutes:Seconds. For
more information on compression presets, see “Setting Compression
Presets” on page 168.
Figure 89. Message box showing record capacity
3. Click Close .
Viewing an Audio Monitor for a Panel
The Audio Monitor allows you to monitor the level of an audio signal for a
panel. To view a panel’s audio monitor:
1. Click a panel to make it active.
2. Choose Window | Audio Monitor . The Audio dialog box appears, as shown
in Figure 90. There are only two channels in this example, but up to 32
channels are possible if the necessary boards are installed.