HEIDENHAIN ND 100 User Manual - Manual (Page 10)

10 Preface
Safety
The following messages provide safety information for preventing
personal injury and product damage:
Cleaning
 Power-off the DRO.
 Disconnect the power cable from the source of power.
 Clean exterior surfaces with a cloth dampened with water and a
mild detergent.
Measurement axes
The ND 120 DRO’s display 2 or 3 axes depending on the model
purchased. DRO screen images used throughout this manual show
different numbers of axes and are for illustration only.
Read and understand these instructions before use to
avoid the possibility of personal injury or death.
Hazardous live parts may be exposed if the unit is opened.
Do not open the unit. There are no serviceable items
inside.
The protection provided by the equipment may be
impaired if used in a manner not specified. Do not use this
product in any way other than its intended use.
Notice
For safety, operation and handling of the unit, keep this
document for future reference.
Warning! Risk of electrical shock
While cleaning it is possible to conduct electricity from
hazardous live parts if liquid enters the product.
To avoid the hazard, always power off the product,
disconnect the power cable and never use a cloth that is
dripping or saturated with water.
Notice
Never use abrasive cleaners, strong detergents or
solvents to avoid damage to the product.