HEIDENHAIN ND 100 User Manual - Manual (Page 13)

ND 120 QUADRA-CHEK 13
1.1 Overview ..... 18
1.2 Basic Functions ..... 19
Initial power-up ..... 19
Establishing a repeatable machine zero ..... 20
Power-off ..... 20
Panel key descriptions ..... 21
Display modes and soft key layout ..... 24
DRO mode screen ..... 24
Feature evaluation mode screens and soft keys ..... 25
Feature measurement mode screen and soft keys ..... 26
Menus ..... 27
1.3 Preparing to Measure ..... 30
Power-up ..... 30
Establish machine zero ..... 30
Select the desired annotation ..... 31
Toggle between forward and backward annotation ..... 31
Align the part to a measurement axis ..... 32
Perform a part alignment (Skew) ..... 32
Establish a datum ..... 33
Probe skew and part edge lines for point construction ..... 33
Construct a datum point from line features ..... 34
Zeroing the datum ..... 34
Presetting the datum ..... 35
1.4 Measuring Part Features ..... 36
Part features ..... 36
Feature list ..... 36
Probing part features ..... 36
Probing with crosshairs ..... 36
Measuring features ..... 37
Auto repeat ..... 37
Measuring points ..... 38
Measuring lines ..... 39
Measuring circles ..... 40
Measuring distances ..... 41
Measuring angles ..... 42
1 Operation ..... 17