HEIDENHAIN ND 1100 - Manual (Page 43)

4-1
Chapter 4
Setup
Configuring the QC100
The Setup menu
The operating parameters of the QC100 must be configured prior
to using the system the first time, or any time part measurement,
reporting, or data communication requirements change. System
configurations are entered into the system using a few navigation
and selection keys located of the front panel. The process is facili-
tated by a simple Setup menu structure of configuration func-
tions that can be quickly navigated on the large LCD display.
All operating parameters of the QC100 can be configured using
functions in the Setup menu. These parameters include:
• Language shown on the LCD display
• Display format of measurement data
• Encoder configuration
• Hotkey configuration
• Print configuration for reports
• Ports configuration for serial and parallel communication
• Supervisor password and program lock
• Squareness angle
• LEC (Linear Error Correction)
• SLEC (Segmented Linear Error Correction) configuration
• NLEC (Non-Linear Error Correction)
• Scale factor
• Misc (Miscellaneous) parameters such as key delay
Parameter configurations will be retained by the system until they
are changed again in the Setup menu in a new session.