HEIDENHAIN ND 1100 User Manual

Page 70

Advertising

Chapter 4

Setup

4-28

Input the chart’s Actual (or Error) data by incrementing the X and

X and

Y position (P

Y position (Pos) values

os) values

os) values to select a position, scrolling to the Ac-

Ac-

tual (or Error) data fields

tual (or Error) data fields and entering the X and Y data

X and Y data

X and Y data for the

selected position. The following example enters data for the first
few positions of the chart.

NOTE

NOTE
When a position is selected, the Nominal and anticipated Actual

When a position is selected, the Nominal and anticipated Actual

When a position is selected, the Nominal and anticipated Actual
(or Error) values will be displayed. The Actual values are

(or Error) values will be displayed. The Actual values are

(or Error) values will be displayed. The Actual values are
changed if necessary by simply entering data over the displayed

changed if necessary by simply entering data over the displayed

changed if necessary by simply entering data over the displayed
value.

value.

Scroll to the Y P

Y P

Y Pos field

os field

os field and in-

crement it to 2 by pressing the
Increment (Inc) softkey

Increment (Inc) softkey

Increment (Inc) softkey.

Scroll to the Actual X and Y

Actual X and Y

data fields

data fields and enter the X and

X and

Y measurement data

Y measurement data for the
1,2 position from the chart.

Scroll back to the Y P

Y P

Y Pos field

os field

and increment it to 3 by press-
ing the Increment (Inc) softkey

Increment (Inc) softkey

Increment (Inc) softkey.

Advertising