Gateway 6400 - Manual (Page 102)

Memory and processor problems 93
Memory and processor problems
The system detected memory errors during start up.
The system does not recognize a new or second processor.
Probable cause Solution
Memory was added or
removed, and the new
configuration was not saved
in BIOS Setup utility Open the BIOS Setup utility and save the new
memory configuration.
The memory was installed
incorrectly Make sure the memory is seated and oriented
correctly.
A memory chip is faulty Replace the card with the faulty chip.
Third-party diagnostic programs can help
determine which chip or memory segment is
failing.
Probable cause Solution
The processor was installed
incorrectly or was not seated
properly in the socket Check the installation. Make sure the
processor is fully seated in its socket. The
processor should be recognized automatically
if it was installed correctly.
05032.book Page 93 Monday, July 10, 2000 11:43 AM