Interphase Tech iSPAN 5535 PRI - Manual (Page 137)

Appendix G: Quick Reference of Common Tasks
iSPAN PRI PCI ISDN Users Guide 117
Know which
adapter’s port is
used when calling
with an ISDN RAS
port Note the following (assuming that the
iSPAN
-PRI is
the only ISDN RAS-capable device):
• Port #0: ISDN 1 - 23 ( USA)
ISDN 1 - 30 (Europe)
• Port #1: ISDN 24 - 46 (USA)
ISDN 30 - 60 (Europe)
See if the drivers
are running 1. From the Start menu, select Programs, then
Administrative Tools (Common), and then
Event View
er. The following messages must
appear:
– SynSV6 The Device \Device\SynSV6 has been
successfully created. Its symbolic link name is
\DosDevices\SynSV6.
– SynSYS Adapter SynCard0 Opened.
– SynSYS SynSys Driver Loaded.
2. From the Start menu, select Settings, and then
Control Panel.
3. Double-click the Devices icon. The following
devices must appear in the Devices list with a
status of Started:
– Interphase 5535 RAS ISDN
– Interphase SYNOS V6 API
– Interphase WAN Adapters
In addition, the software LEDs must be green in the
WAN Adapter Setup dialog and the Interphase 5535
RAS Support Properties dialog.
If you want to... Do this...