Interphase Tech iSPAN 5535 PRI - Manual (Page 139)

Appendix G: Quick Reference of Common Tasks
iSPAN PRI PCI ISDN Users Guide 119
Configure a RAS
port to accept
incoming calls 1. Open the Remote Access Setup dialog. (See Open
Remote Access Setup on page 118). Then click
Configure.
2. Enable either the Receive calls only or the Dial
out and Receive calls option.
3. Confirm your choice by clicking OK.
Configure a RAS
port to dial out 1. Open the Remote Access Setup dialog. (See Open
Remote Access Setup on page 118). Then click
Configure.
2. Enable either the Dial out only or the Dial out and
Receive calls option.
3. Confirm your choice by clicking OK.
Manage RAS
incoming ports 1. From the Start menu, select Programs, then
Administrative Tools (Common), and then
Remote Access Admin.
2. View online help for instructions.
Determine how
many remote users
are connected 1. From the Start menu, select Programs, then
Administrative Tools (Common), and then
Remote Access Admin.
2. View online help for instructions.
Determine how
many ports are
available 1. From the Start menu, select Programs, then
Administrative Tools (Common), and then
Remote Access Admin.
2. View online help for instructions.
Make a RAS
outgoing call 1. From the Start menu, select Programs, then
Accessories, and then Dial-Up Networking.
2. Create a new RAS phonebook entry if the
phonebook is empty. (For more detailed
information, see the RAS online help).
3. Select an entry in the phonebook, and click the
Dial button.
If you want to... Do this...