Interphase Tech iSPAN 5535 PRI - Manual (Page 55)

Chapter 4: Installing the Software
iSPAN PRI PCI ISDN Users Guide 35
9. Make sure the 5535 adapter is selected in the Cards list
of the WAN Adapters Setup dialog. Then do the
following to configure the adapter’s ISDN ports:
a. Select the port you want to configure (from
[0] ISDN PRI to [1] ISDN PRI), and click
Properties to display the ISDN PRI Port Properties
dialog:
Figure 4-8. ISDN PRI Port Properties
b. Select the switch type that corresponds to your ISDN
subscription, and click OK. (For more information
about switch types, see Setting Up ISDN PRI Port
Properties on page 56.)
c. When the WAN Adapters setup dialog reappears,
repeat steps a and b for each ISDN PRI port.
d. When all ISDN ports are configured, click OK.
The configuration software automatically finds
firmware for the adapter. It updates the registry and
dynamically installs the drivers.