Interphase Tech iSPAN 5535 PRI - Manual (Page 34)

Connecting the Adapter to an MVIP Bus
14 Interphase Corporation
N
OTE
If you need to connect the adapter to other MVIP
telephony processing adapters in the cabinet, such as
voice, data, fax, video or image processing adapters, and
have not already done so, see Connecting the Adapter to
an MVIP Bus on page 14.
7. Replace the computer cover.
You are now ready to connect the adapter to the appropriate
PRI line, as described in Connecting to the Line on page 17.
Connecting the Adapter to an MVIP Bus
You must connect the adapter to an MVIP bus if you plan to
integrate the adapter with other MVIP telephony processing
adapters, such as voice, data, fax, video or image processing
adapters. To create a dedicated interconnection between these
adapters, connect a ribbon cable to the 40-pin, double-row,
right-angled headers on the top edge of all MVIP adapters.
For optimal electrical signal quality on the MVIP ribbon cable,
you must place the MVIP adapters in a specific order
(depending on the number of connections), and electrically
terminate two MVIP clock signals.