Interphase Tech iSPAN 5535 PRI - Manual (Page 142)

Procedures
122 Interphase Corporation
Allow a remote user
to set a specific IP
address 1. From the Start menu, select Settings, and then
Control Panel.
2. Double-click the Network icon, and select the
Services tab.
3. From the services list, select Remote Access
Service, and then click Properties.
4. In the Remote Access Setup dialog, click
Network.
5. In the Network dialog, click the TCP/IP
Configure button.
6. In the RAS server TCP/IP Configuration dialog,
enable the Allow remote clients to request a
predetermined IP address option.
If you want to... Do this...