Iomega FotoShow Digital Image Center - Manual (Page 14)

14 FotoShow ™ Digital Image Center User’s Manual
If the tutorial does not start:
1.Press the SLIDESHOW button on the FotoShow ™ remote control.
2.Use the right and left arrow buttons to select Open/Create Slideshow, then press GO.
3.Use the right and left arrow buttons to select Open Slideshow, then press GO.
4.Use the up and down arrow buttons to select the slideshow titled Auto, then press
GO .
5.Use the right and left arrow buttons to select Start Show Manual/Auto, then press GO.
6.Use the right and left arrow buttons to select Start Show Manual, then press GO.
7.Use the arrow buttons to navigate through the slideshow. Use either the down or
right arrow button to move to the next slide. Press either the up or left arrow
button to move to the previous slide. Press either the BACK or SLIDESHOW button
to exit the tutorial.