Lynx Professional Grills 42" Free Standing Grill L42PSR-1 - Manual (Page 10)

10
eleCtrIC IgnItIon
warnIng
never attempt to light a burner if you smell gas.
Always keep the lid open (side-burner lids must be com-
ever attempt to light a burner if you smell gas. ever attempt to light a burner if you smell gas.
pletely removed) when lighting your grill.
Always keep the lid open (side-burner lids must be com- Always keep the lid open (side-burner lids must be com-
Releasing fuel into a closed grill before lighting will in
pletely removed) when lighting your grill. pletely removed) when lighting your grill.
-
crease the risk of explosion, property damage , personal
Releasing fuel into a closed grill before lighting will in Releasing fuel into a closed grill before lighting will in
injury or death.
crease the risk of explosion, property damage , personal crease the risk of explosion, property damage , personal
Keep your face and body as far from the grill as possible
injury or death. injury or death.
when lighting. Any time a burner doesn’t light within 5
Keep your face and body as far from the grill as possible Keep your face and body as far from the grill as possible
seconds, turn off the control, wait 5 minutes for gas to dis-
when lighting. Any time a burner doesn’t light within 5 when lighting. Any time a burner doesn’t light within 5
sipate, and repeat the lighting procedure.
1)
)
)
)
B
efore proceeding, make
sure you have completed
efore proceeding, make efore proceeding, make
the “
sure you have completed sure you have completed
before
sure you have completed sure you have completed
each
sure you have completed sure you have completed
use”
checklist.
follow these steps to light any
of the burners on your grill:
ollow these steps to light any ollow these steps to light any
first, make
sure all burner
control knobs
are set to off
for the maIn
brass burner
burner:
Push and hold the control
knob in for  seconds,
allowing the igniter to heat
up. Then rotate the knob to
“liTe”. After ignition, set
up. Then rotate the knob to up. Then rotate the knob to
the knob to the desired heat
setting.
before eaCh
use
Before any use, always make
sure that:
... you do not smell gas
before you light the grill. If
... you do not smell gas ... you do not smell gas
you do smell gas, shut every-
thing off and have a qualified
you do smell gas, shut every you do smell gas, shut every
plumber check for leaks.
thing off and have a qualified thing off and have a qualified
…you never leAve A A The
grill unATTended while
CooKing.
… the cooking area is free
and clear of any combustibles,
… the cooking area is free … the cooking area is free
besides your food, that might
and clear of any combustibles, and clear of any combustibles,
ignite.
… the control knobs turn
freely.
… if you are using a
portable propane cylinder, it is
securely connected and leak
portable propane cylinder, it is portable propane cylinder, it is
tested. (see indeX: “Cylinder
retention instructions” for details.)
… you know where the
main gas supply shut-off is
… you know where the … you know where the
located
main gas supply shut-off is main gas supply shut-off is
… the burners are seated
properly in the grill with
mounting legs in the slots.
properly in the grill with properly in the grill with
strongly or blowing on the
back of grill.
strongly or blowing on the strongly or blowing on the







for the rotIsserIe
burner:
a thermocouple sensor with a
safety valve that automatically
a thermocouple sensor with a a thermocouple sensor with a
shuts off the flow of gas if the
safety valve that automatically safety valve that automatically
burner goes out. (See IndEX:
“windy Conditions” for tips on how
to prevent burner blow out)
To light the rotisserie burner,
push and hold the control
knob in for
push and hold the control push and hold the control

push and hold the control push and hold the control
seconds and
push and hold the control push and hold the control
then turn the knob to the
“liTe” position.
After ignition ConTinue
holding The ConTrol
Knob in for 30 to 60
seconds. during this time the
thermocouple will heat up and
the safety valve will remain
thermocouple will heat up and thermocouple will heat up and
open.
If you release the control knob
before the thermocouple has
If you release the control knob If you release the control knob
heated up, the safety valve
before the thermocouple has before the thermocouple has
will shut off the flow of gas to
heated up, the safety valve heated up, the safety valve
the rotisserie burner and you
will have to re-light the burner.