Lynx Professional Grills 42" Free Standing Grill L42PSR-1 User Manual

Page 33

Advertising
background image



Keep any threading

compound off of the first

Keep any threading

Keep any threading

two pipe threads to avoid

compound off of the first

compound off of the first

having any small pieces of

two pipe threads to avoid

two pipe threads to avoid

compound break loose and

having any small pieces of

having any small pieces of

clog a burner valve or

compound break loose and

compound break loose and

orifice.

clog a burner valve or

clog a burner valve or

do not put sealant

on any male end of flare

o not put sealant

o not put sealant

fittings

on any male end of flare

on any male end of flare

.

for

built-in installations, it is rec-

ommended that any flexible

pipe used be kept as short

as possible.

pipe used be kept as short

pipe used be kept as short

(see indeX: “gas

Connections” for typical permanent

hook up.)

for

freestanding

units using

freestanding

freestanding

natural gas, Lynx strongly

recommends using a quick

disconnect kit.

recommends using a quick

recommends using a quick

lP gAs

grills set up for lP gas come

equipped with an

rills set up for

rills set up for

lP hose/

regulator assembly for con

equipped with an

equipped with an

-

nection to a standard 20 lb. lP

cylinder. (Type 1). All fittings

necessary to attach the

cylinder. (Type 1). All fittings

cylinder. (Type 1). All fittings

assembly to the grill are

included.

Keep

Keep

last two

last two

Keep

Keep

Keep

Keep

Keep

Keep

Keep

threads

threads

clean

clean

P cylinder with type 1 valve

P cylinder with type 1 valve

connection

connection

Permanently plumbed lP con-

nections, such as those in line

Permanently plumbed

Permanently plumbed

with a bulk cylinder, require

a 4/11 r

with a bulk cylinder, require

with a bulk cylinder, require

egulator. (

with a bulk cylinder, require

with a bulk cylinder, require

lynx P/

with a bulk cylinder, require

with a bulk cylinder, require

ll

n

30781)
if you are using a 4/11

maxitrol regulator, ensure that

it is set for the correct fuel by

axitrol regulator, ensure that

axitrol regulator, ensure that

adding or removing the cap

gasket as shown below.

adding or removing the cap

adding or removing the cap

gas line to the grill.

warning

warning

Do not change the

Do not change the

regulator/hose assembly

regulator/hose assembly

or use any other assembly

or use any other assembly

than the one supplied with

than the one supplied with

your Lynx grill.

your Lynx grill.

than the one supplied with

than the one supplied with

than the one supplied with

than the one supplied with

than the one supplied with

than the one supplied with

than the one supplied with

Do not attempt to use a

Do not attempt to use a

5LP-A equipped regulator/

5LP-A equipped regulator/

Do not attempt to use a

Do not attempt to use a

Do not attempt to use a

Do not attempt to use a

Do not attempt to use a

Do not attempt to use a

Do not attempt to use a

hose assembly with a

hose assembly with a

5LP-A equipped regulator/

5LP-A equipped regulator/

5LP-A equipped regulator/

5LP-A equipped regulator/

5LP-A equipped regulator/

5LP-A equipped regulator/

5LP-A equipped regulator/

standard 510 POL cylinder/

standard 510 POL cylinder/

valve assembly.

valve assembly.
Do not store a spare LP-gas

Do not store a spare LP-gas

cylinder under or near this

cylinder under or near this

Do not store a spare LP-gas

Do not store a spare LP-gas

Do not store a spare LP-gas

Do not store a spare LP-gas

Do not store a spare LP-gas

Do not store a spare LP-gas

Do not store a spare LP-gas

appliance

appliance
Never fill the cylinder

Never fill the cylinder

beyond 80 percent full

beyond 80 percent full

Never fill the cylinder

Never fill the cylinder

Never fill the cylinder

Never fill the cylinder

Never fill the cylinder

Never fill the cylinder

Never fill the cylinder

If the information above is

If the information above is

not followed exactly, a fire

not followed exactly, a fire

causing death or serious

causing death or serious

injury may occur.

injury may occur.

lP Cylinder

requirements

The lP cylinder must be con-

structed and marked in accor-

structed and marked in accor

structed and marked in accor

dance with the specifications

for

dance with the specifications

dance with the specifications

lP gas cylinders of the

dance with the specifications

dance with the specifications

u.s

dance with the specifications

dance with the specifications

.

department of Transportation

P gas cylinders of the

P gas cylinders of the

(do

epartment of Transportation

epartment of Transportation

T) and designed for use

epartment of Transportation

epartment of Transportation

with a Type 1 system only.
cylinders must be secured

using the provided cylinder

retention system to avoid

using the provided cylinder

using the provided cylinder

accidental movement.

cylinder for a refill, exchange

only for a Type 1 20lb cylinder

cylinder for a refill, exchange

cylinder for a refill, exchange

with an over-fill protection

only for a Type 1 20lb cylinder

only for a Type 1 20lb cylinder

device.

with an over-fill protection

with an over-fill protection

never use a cylinder with a

damaged valve.
A dented or rusty lP cylinder

may be hazardous and should

be avoided. If in doubt, have

may be hazardous and should

may be hazardous and should

it checked by your lP supplier.
Always check for leaks after

every lP cylinder change.

(see indeX: “leak Test” for further

details.)

Always shut off the lP-gas

supply at the cylinder when

the grill is not in use.

supply at the cylinder when

supply at the cylinder when

cylinders must be stored

outdoors in a well-venti-

lated area out of the reach of

children. If your grill is stored

indoors, the lP cylinder must

be stored outside.

Advertising