Lexicon SDP-40 - Manual (Page 15)

LOCATION CONSIDERATIONS
The unit requires special care during installation to ensure
optimal performance. The unit should be installed on a shelf or in
a standard 19” equipment rack using the enclosed optional
rack-mount kit.
Observe the following precautions when installing the unit:
• Select a dry, well-ventilated location out of direct sunlight.
• Do not stack the unit directly above heat-producing
equipment, such as power amplifiers.
• Avoid placing the unit near unshielded TV or FM antennas, cable
TV decoders, and other RF emitting devices. If placed in close
proximity to the unit, these devices may cause interference.
• Do not obstruct the front panel IR Receiver window (see pages
2-2 and 2-6 for illustrations). The remote control must be in
line-of-sight with the receiver for proper operation. If line-of-
sight is impractical, an infrared remote system can be used
with the rear panel IR IN connector. The unit can be placed
inside a glass cabinet. However, smoked glass will reduce the
range of the remote control as well as the readability of the
front panel display.
NAVIGATING THE MENUS
The remote control must be used to navigate
through the extensive menu structure (see
page 2-8 for more information about the
remote control). Pressing the MENU button
accesses the MAIN MENU (pictured at the
right), which can be used to access the three primary menus:
MODE ADJUST, AUDIO CONTROLS, and SETUP. These menus are
discussed in Sections 5, 4, and 3. The complete menu structure is
illustrated in the Appendix, beginning on page A-5.
CAUTION
USING THE DOCUMENTATION
The SDP-40 has many impressive features. It is designed to be
customized to individual systems and listening spaces. For these
reasons, the information contained in this user guide is extensive.
Refer to this documentation for assistance with installation,
calibration, and operation of the unit. Settings that are reached
during the calibration process can be recorded on the installation
worksheet located in the Appendix (see page A-12).
USER GUIDE SYMBOLS
Following are symbols that appear throughout this user guide:
Calls attention to a procedure, practice, condition, or
the like that, if not correctly performed or adhered
to, could result in injury or death.
Calls attention to a procedure, practice, condition, or
the like that, if not correctly performed or adhered
to, could result in damage to or destruction of part or
all of the product.
Calls attention to information that is essential to
highlight.
Represents a menu path. The steps in grey boxes
illustrate a series of selections that must be made to
reach the destination in the black box. In the
example above, the SETUP, INPUTS, and DVD1
options must be selected to reach the NAME menu.
WARNING
CAUTION
Note:
1-4
Getting Started
JBL
SETUP INPUTS DVD1 NAME
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP