Lexicon SDP-40 - Manual (Page 93)

DOLBY DIGITAL STATUS MENU
The DOLBY DIGITAL STATUS menu will appear when a Dolby
Digital listening mode is selected. It features L, C, R, SL, SR, and LFE
level meters (see page 5-18 for more information).
Parameter Values
CHANNELS 3/2.1, 3/2, 3/1, 2/2, 2/1, 2/0, 1/0
ENCODING MATRIX, NONE
SAMPLE RATE 48kHz
REF OFFSET -4dB
An alphabetical listing of parameter descriptions begins on page 5-20.
5.1 BYPASS STATUS MENU
The 5.1 BYPASS STATUS menu will appear when the 5.1 BYPASS
listening mode is selected. It features L, C, R, SL, SR, and LFE level
meters (see page 5-18 for more information).
Parameter Values
INPUT The name of the selected input
MODE 5.1 BYPASS
INPUT TYPE BYP
An alphabetical listing of parameter descriptions begins on page 5-20.
5-19
The MODE ADJUST Menu
SDP-40
5.1 ANALOG STATUS MENU
The 5.1 ANALOG STATUS menu features L, C, R, SL, SR, and LFE
level meters (see page 5-18 for more information). It will appear
when all of the following conditions are met:
• 5 STEREO & 5.1 ANLG is selected on the REAR PANEL CONFIG
menu (see page 3-30).
• The ANALOG IN parameter on the INPUT SETUP menu is set to
5.1 ANALOG (see page 3-6).
• The INPUT SELECT parameter on the MAIN ADV menu is set to
either AUTO or ANALOG (see page 3-13). When set to AUTO,
no digital input types can be present.
• The ANALOG BYPASS parameter on the MAIN ADV menu is set
to OFF (see page 3-13).
Parameter Values
INPUT The name of the selected input
MODE The name of the selected listening mode
INPUT TYPE ANLG
SAMPLE RATE 96kHz
An alphabetical listing of parameter descriptions begins on page 5-20.