Lexicon SDP-40 - Manual (Page 48)

3-15
The SETUP Menu
SDP-40
INPUT SELECT (AUTO, ANALOG, DIGITAL)
The INPUT SETUP menu allows the selection of two audio
connector types - one analog, one digital. INPUT SELECT specifies
how these connectors interact. The following settings are available:
• The DIGITAL setting forces the unit to utilize the DIGITAL
IN connector for Zone 2. If an ANALOG IN connector is
also selected, it will be ignored. The unit will mute when
an invalid digital audio input type is received. Valid digital
audio input types include PCM, Dolby Digital, and
dts(-ES). See page 2-16 for more information about using
the DIGITAL setting in multiple zones.
• The ANALOG setting forces the unit to utilize the selected
ANALOG IN connector for Zone 2. If a DIGITAL IN
connector is also selected, it will be ignored.
• The AUTO setting allows the unit to switch between the
selected DIGITAL IN and ANALOG IN connectors. The
DIGITAL IN connector is utilized when a valid digital audio
input type is present. When invalid digital audio input
types are received, the unit automatically switches to the
ANALOG IN connector. INPUT SELECT will automatically
be set to AUTO when a connect or selected for both the
DIGITAL IN and ANALOG IN parameters. This setting is
recommended for input sources that utilize both digital
and analog audio input types, such as a laser disc player.
Note:
Some sources supply valid digital audio input types
that remain active even when no audio is present in
the signal. Because the unit recognizes these as valid
digital audio input types, it will not switch to the
ANALOG IN connector. For these sources, it is
recommended to configure two different inputs - one
for digital audio input types, and a second for analog
audio input types.
DVD1 INPUT SETUP
NAME DVD1
DIGITAL IN COAX-1
ANALOG IN NONE
ANLG IN LVL AUTO
VIDEO IN S-VIDEO-1
COMPONENT IN 1
2-CH L7 FILM
D 5.1 L7 FILM
dts L7 FILM
MAIN ADVANCED
ZONE2 ADVANCED
RECORD ADVANCED
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
DVD1 ZONE 2 ADV
INPUT SELECT DIGITAL
INPUT SETUP
DVD1
DVD2
LD
TV
SAT
VCR
CD
PVR
GAME
TAPE
TUNER
AUX
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
DVD1 is used as an example in this illustration, and will continue to be used as an example
throughout this section. Whenever “DVD1” appears as a step in a menu path, any other input
may be substituted.