Basic operation, Remote control, Command bank selection – Lexicon SDP-40 User Manual

Page 23: Sdp-40

Advertising
background image

2-7

Basic Operation

SDP-40

REMOTE CONTROL

The SDP-40 remote control (pictured at the left) provides full operation of the unit, executing
functions such as on-screen menu navigation that are not available from the front panel. For best
results, make sure the front panel IR Receiver window is not obstructed (see pages 2-2 and 2-6 for
illustrations). The remote control must be in line-of-sight with this receiver for proper operation.
If the unit is placed inside a glass cabinet, smoked glass will reduce the range of the remote con-
trol.

The remote control requires two AA batteries that must be changed on a regular basis. When the
batteries are low on power, the remote control will enter a low-voltage condition that prevents it
from operating the unit. Operation will be restored when new batteries are installed.

COMMAND BANK SELECTION

The four remote control command banks can be accessed by pressing the MAIN, ZONE, REC, or
SHIFT buttons. Each button accesses a separate bank of commands until another bank is
selected. Pressing a bank selection button instructs the unit to engage the selected command
bank. Command bank selection buttons themselves do not send commands to the unit.

The unit indicates the last remote control command bank from which it received a command in
the top-right corner of the on-screen display, provided the REMOTE STATE parameter on the ON-
SCREEN DISPLAY menu is set to ON (see page 3-32). A yellow “Z” will appear when a command
from the ZONE bank was received last. A red “R” will appear when a command from the REC bank
was received last. A blue “S” will appear when a command from the SHIFT bank was received last.
Nothing will appear when a command from the MAIN bank was received last.

The chart that begins on the next page explains the functions performed by remote control
buttons when each command bank is active.

Note:

The MAIN, ZONE, REC, or SHIFT buttons should be pressed and released to access
their corresponding command banks. Do not hold them down.

DVD-1

DVD-2

L D

TV

CD

TAPE

TUNER

MENU

PVR

SAT

FP

BLUE

OSD

VCR

AUX

GAME

MAIN

SHIFT

STAT

7 / 5

2 CH

MUTE

MUSIC

ZONE

REC

LIGHT

MODE

VOL

1

5

4

3

2

6

7

8

9

10

11

12

13

14

15

16

Advertising