Lexicon SDP-40 - Manual (Page 57)

3-24
The SETUP Menu
JBL
SYNTHESIS 7CH SETUP
Default
Parameter Value Values
FRONT L/R 80Hz 80Hz
CENTER 80Hz 80Hz
SIDE L/R 80Hz 80Hz
REAR L/R 80Hz 80Hz, NONE
SUB L/R MONO MONO
SUB XOVER 80Hz 80Hz
LFE OFF OFF
The SYNTHESIS 7CH SETUP menu can be used to configure the
MAIN AUDIO OUTPUTS for a 5.1 or 7.1-channel Synthesis system,
which incorporates THX-certified loud speakers. For a non-
THX-certified speaker system, use the CUSTOM SETUP menu (see
page 3-18). When SYNTHESIS 7CH SETUP is selected, a message
will appear cautioning that, if the right MENU arrow is pressed
again, the MAIN AUDIO OUTPUTS will automatically change to a
SYNTHESIS 7CH speaker configuration. This will override custom
speaker settings that have been chosen. Press the right MENU
arrow to activate a SYNTHESIS 7CH speaker configuration. Press
the left MENU arrow to cancel SYNTHESIS 7CH speaker
configuration and return to the SPEAKER SETUP menu.
If a SYNTHESIS 7CH speaker configuration is activated, the
SYNTHESIS 7CH SETUP menu will display the SYNTHESIS 7CH
configuration settings. The unit will automatically set all outputs to
80Hz with a 24dB per octave filter. The only exceptions are SUB
L/R and LFE. SUB L/R will be set to MONO (see page 3-22) and LFE
will be set to OFF (see page 3-23). SYNTHESIS 7CH speaker
configuration applies to all inputs and listening modes.
SETUP SPEAKERS SYNTHESIS 7CH SETUP
SYNTHESIS 7CH SETUP
PRESSING THE RIGHT V
BUTTON WILL
AUTOMATICALLY CHANGE
THE OUTPUTS TO A
SYNTHESIS 7CH SPEAKER
CONFIGURATION
SPEAKER SETUP
CUSTOM SETUP
SYNTHESIS 7CH SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SYNTHESIS 7CH SETUP
FRONT L/R 80Hz
CENTER 80Hz
SIDE L/R 80Hz
REAR L/R 80Hz
SUB L/R MONO
SUB XOVER 80Hz
LFE OFF
80Hz
M
SUB L
80Hz
C
80Hz
R
80Hz
SR
80Hz
80Hz
SL
80Hz
RR
80Hz
RL