Polycom Webcam - Manual (Page 160)

ViewStation EX User Guide
158 www.polycom.com
Analog Telephone Calls
In countries where it is approved, you can connect an analog telephone
line to your ViewStation EX system. This lets you make telephone
calls through the ViewStation EX system and include audio third
parties in your video calls.
Placing a Telephone Call
You can use your system as a standard speakerphone.
To place a telephone call from your system:
1. From the main calling screen, select Telephone and press the
SELECT button. The Telephone screen appears.
Figure 5-7. Telephone Screen
2. Use the numeric keypad on the remote control to enter the
number you want to dial.
If you are dialing within your PBX system, you only have to dial
the last four digits of the number.
If you want to delete a digit, press the LEFT ARROW button on
the remote control.
To delete an entire phone number, highlight the Clear icon on
the screen and press the SELECT button on the remote control.
3. Press the CALL•HANG-UP button on the remote control to
place the call.