Polycom Webcam User Manual
Page 292
ViewStation EX User Guide
290
www.polycom.com
❑
Backlight Compensation
—Backlight compensation is used in
conference rooms where the subject appears darker than the
background. When enabled, the camera automatically adjusts
for a light background.
❑
Allow Remote Monitoring
—Remote monitoring allows a user
to remotely view a conference room prior to a scheduled
meeting using the system’s Web interface.
❑
Meeting Password
—The meeting password is used:
•
As the system’s password when it it is used as an MCU.
•
For dialing into an MCU with a password already set.
•
As the password for viewing slides on the Web interface.
•
As the password for viewing streams on the Web interface.
•
For accessing Closed Caption.
❑
Far Site Name Display Time
—This option displays the name of
the far site for a defined number of seconds.
•
15 seconds
—The far site name is displayed by default for 15
seconds.
•
Blank
—The far site name is displayed until the call is
ended.
❑
Multipoint Mode
—To change Multipoint Mode, highlight the
Multipoint Mode
field and press the SELECT button on your
remote control. The Multipoint Setup screen appears. In the
Multipoint Setup
screen, you can set the Multipoint Mode to
Auto, Discussion, Presentation,
or Full Screen. By default, it is
set to Auto. For more information about multipoint modes, refer
to
in chapter 6.
You can also set the Auto Answer Multipoint mode in the
Multipoint Setup
screen. For more information, refer to Auto
Answer Multipoint
at the beginning of this section on page
288
.
Note
This multipoint option is not available unless you update your
ViewStation EX system to support multipoint capabilities. For more