Enabling data conferencing on your system, Using a showstation ip, Using microsoft netmeeting – Polycom Webcam User Manual
Page 219
Chapter 6 - Using Advanced System Features
© Polycom, Inc. 2003
217
StreamStation, WebStation or ShowStation itself, or, the IP address
of the PC on which Netmeeting is running.
Enabling Data Conferencing on your System
The following explains how to enable the data conferencing
capabilities on the ViewStation EX system.
To enable data conferencing:
1.
Select System Info > Admin Setup > Data Conference. The
Data Conference
screen appears.
2.
Enable either the NetMeeting or ShowStation IP option. The
ShowStation IP option appears only if a ShowStation is
connected to the ViewStation EX or the LAN.
Note
Data conferencing is only available during H.320 calls and must be
supported by far-site systems
Using a ShowStation IP
For more information on ShowStation IP, see
Using Microsoft NetMeeting
For more information about data conferencing using NetMeeting,
refer to
in chapter 7.