Polycom Webcam - Manual (Page 251)

Chapter 7 - Using the System with a PC
© Polycom, Inc. 2003 249
❑
Open and save profiles
Installing a Logo
You can add your own logo to the main menu through the PMAC
utility screen. The logo will appear in the top right corner of the
screen.
Note
Note: The logo must be a jpg image and smaller than 125 x 75 pixels.
To add your own logo:
1. Launch the PMAC utility.
2. Enter the IP Address and the Password of your system.
3. Click the System Logo tab.
4. Click the Browse button to navigate to the jpg file you wish to
install.
5. Clicking the OK button will apply the changes, however it will
close the application.
6. Click the Apply button to install the logo.
Creating Custom Speed Dial and Custom Video Numbers Screens
The normal Speed Dial screen contains the six most-recent calls. In
the Custom Speed Dial screen, you can create additional Speed Dial
buttons. The custom Speed Dial screen can only be created, edited,
and deleted from the PMAC utility.
To access the Custom Speed Dial and Custom Video Numbers
screens:
1. First, install a custom Logo on the system (see preceding
section).