Adding a telephone call to a video call, Disconnecting a telephone call – Polycom Webcam User Manual
Page 161
Chapter 5 - Using the ViewStation EX
© Polycom, Inc. 2003
159
4.
To end the call, press the CALL•HANG-UP button on the
remote control.
Adding a Telephone Call to a Video Call
To add a telephone call once your video call is connected:
1.
Press the CALL•HANG-UP button on the remote control. The
Call Hang-up Choices
screen appears.
2.
Select the Add Speakerphone icon and press the SELECT
button. The Telephone screen appears.
3.
Enter the phone number of the third party using the numeric
keypad on the remote control and press the SELECT button. The
system begins dialing the third party.
4.
Once the third party connects, press the NEAR or FAR button
on the remote control to return to the videoconference.
Note
Three-way calling is only supported if you have enabled three-way
calling from your local telephone company. Select the FLASH
button on the telephone screen to obtain another line.
Disconnecting a Telephone Call
To disconnect a telephone call:
1.
Press the CALL•HANG-UP button on the remote control. The
Call Hang-up Choices
screen appears.
2.
Select the Disconnect Speakerphone Call icon and press the
SELECT button on the remote control. The third party
disconnects.