Polycom KIRK 14117800 - Manual (Page 141)

Configuring KIRK Wireless Server 600v3 141
KIRK Wireless Server 600v3 Installation and Configuration Guide
5 Save the configuration now or wait until you have finished configuring the whole
installation.
For more information about saving the configuration, refer to
“Saving
Configurations” on page 141 .
7.8.7 Saving Configurations
This section describes how to save your configurations. You can save all the
configurations or just some of them.
1
On the File menu, click Save.
A Save dialog box appears.
Figure 79 Configuration Tool: Save dialog box
2
Select the configurations you want to save, and then click OK.
3
Indicate in which folder the file should be saved, and then click OK.
7.8.8 Uploading Configuration Files
This section describes how to upload configuration files.
Note:
When uploading a configuration file to the KWS600v3, the KWS600v3 in question
must have a specific IP address valid to the whole network. To ensure that the KWS600v3
has a specific IP address valid to the network either get an IP address automatically
through DHCP mode or assign a specific IP address through the Administration Page.
For more information about assigning a specific IP address through the Administration
Page, refer to “Assigning a Specific IP Address (Primary)” on page 92 .
1
On the File menu, click Upload.
A Select files to upload dialog box appears.