Olympus LS-20M - Manual (Page 19)

19
1
EN
Po
we
r s
u
p
p
ly
Power supply
Connect to the USB-AC adapter to charge
It can be charged by connecting to the USB-AC
adapter (F-3AC).
1 Plug the recorder’s USB cable into the
AC adapter.
• Before connecting the AC adapter,
switch the USB connection setting to
[AC Adapter] (
☞ P.88).
• Before connecting the USB cable, exit
HOLD mode (
☞ P.24).
2 Connect the AC cable to the AC
adapter, and then to an AC outlet.
To the USB-AC
adapter’s (F-3AC) USB
connector
To the
AC outlet
3 While the recorder is during stop mode
or turned off, connect the USB cable to
the connecting terminal on the bottom
of the recorder.
To the USB
connector
4 Press the
`OK button to start
charging.
• While [Press OK to start charging] is
flashing, press the
`OK button.
• If a button other than the
`OK button is
pressed, the recorder enters the normal stop
mode.
• The animation of the battery indicator is
displayed on the sub LCD and the PEAK/LED
indicator light turns on.
• When the battery is charged from the
power off mode, pressing any button during
charging will make the recorder switch to
the normal stop mode.
5 Charging is completed.
• The animation of the battery indicator
on the sub LCD ends and the PEAK/LED
indicator light turns off.
• When the battery is charged from the power
off mode, the power turns off after charging
is completed.