Olympus LS-20M - Manual (Page 35)

2
35
EN
Re
co
rd
in
g
A
a
c
b
Recording
A
1 Select the recording folder (
☞ P.32).
• The recording/shooting indicator light will
flash and [≠] will appear on the sub LCD.
• The main LCD turns off.
a Remaining recording time
b File number
c Level meter (changes according to the
recording level and recording function
settings)
• The voice sync level can be set when voice
sync recording is on (
☞ P.80).
• [Rec Mode] cannot be changed in the
recording standby mode or while recording.
Configure this while the recorder is stopped
(
☞ P.67).
• This recorder is designed to be able to
record cleanly and evenly, even in recording
conditions such as when the volume of
the source sound changes significantly.
However, even higher sound quality
recordings can be achieved by adjusting the
recording level manually (
☞ P.68).
3 Press the
9 or 0 button to adjust
the recording level.
Before starting recording, select a folder among
[Folder A] to [Folder E]. These five folders can
be selectively used to distinguish the kind of
recording; for example, Folder [Folder A] might
be used to store private information, while Folder
[Folder B] might be dedicated to holding business
information.
2 Press the REC (
s) button to prepare
recording.
• The level can be adjusted from [00] to [30].
The higher the number, the higher the level
and the larger the indicator position on the
level meter.
• If too big sound is input, the noise may
occur even if [Rec Level] is set to [Auto]
or [Limiter ON] (
☞ P.68). Also, in certain
cases the PEAK/LED indicator light, which
notifies large input, may not light. To ensure
successful recordings, we recommend that
you test the record function and volume
before use.
• [Mic Sense] is initially set to [Low]. If the
sensitivity is too low, set it to [High] (
☞ P.67).
• When [Rec Level] is set to [Auto]
the recording level will be adjusted
automatically. Set [Rec Level] to [Manual]
when using the recording level adjustment
function and the limiter function (
☞ P.68).
STOP ( 4) button
REC ( s) button
9 0 button