Olympus LS-20M - Manual (Page 72)

72
4
EN
Magic Movie
n
5 types of filters allow you to easily apply various
effects when shooting movies, enabling you to
capture dynamic scenes and special moments in
your own distinctive way.
[On]:
Enables the magic movie function. You can
select the magic movie type.
• Select the desired magic movie type from
[ROCK], [POP], [PIN HOLE], [SKETCH] and
[WATERCOLOR].
• If you select [ROCK], effects from [1] to [3]
can be applied.
[Off]:
Disables this function.
Notes
• In case the magic movie is set to [On], only the
movie file with special effects will be recorded.
The original version of the movie will not be
recorded.
• Special effects cannot be applied or removed
afterwards.
• If you want to shoot a movie normally without
applying special effects, verify that the [Magic
Movie] setting is set to [Off] before shooting.
• The zoom function will not work if the [Magic
Movie] has been set to [PIN HOLE].
Image Stabilizer
n
You can reduce the amount of recorder shake that
can occur when shooting in low light situations or
shooting with high magnification.
[On]:
The image stabilizer is activated.
[Off]:
The image stabilizer is deactivated. This is
recommended for shooting when the recorder
is fixed in place on a tripod or other stable
surface.
Note
• Images may not be stabilized if recorder shake is
too severe.
Metering
n
The recorder is equipped with multi-zone metering
and spot metering. Set the proper metering
according to the scene to be shot.
[Multi-zone Metering]:
Shoots to obtain a balanced brightness over
the entire screen (Meters the brightness at the
center and surrounding areas of the screen
separately).
[Spot Metering]:
Shoots the subject at the center during
backlighting (Meters the brightness at the
center of the screen).
Note
• When set to [Multi-zone Metering], the center
may appear dark when shooting against strong
backlighting.
White Balance
n
For more natural coloring, choose a white balance
option suited to the scene.
[{] Auto:
The recorder automatically adjusts the white
balance according to the shooting scene.
[;] Sunny:
For shooting outdoors under a clear sky.
[<] Cloudy:
For shooting outdoors under a cloudy sky.
[:] Fluorescent:
For shooting under daylight fluorescent lighting
(household lighting, etc.).
[=] Incandescent:
For shooting under incandescent lighting
(office, etc.).
[|] Quick Operation:
You can set the optimum white balance for the
shooting conditions by pointing the recorder at
a white object like a sheet of white paper.
Menu setting method
Menu setting method