Olympus LS-20M - Manual (Page 78)

78
4
EN
EDevice Menu
Auto Power Off
A n
Forgetting to turn the power off can be prevented.
If the recorder remains in stop mode for over 10
minutes (Initial setting) while the power is turned
on, the power will be turned off.
[5min.] [10min.] [30min.] [1hour]:
Set the length of time before the power will be
turned off.
[Off]:
Disables this function.
• If any button is pressed, the elapsed time count
before the power turns off will start over again.
Time & Date
A n
See “Setting time and date [Time & Date]”
(
☞ P.25).
Fn setting
A n
See “Fn Setting [Fn. setting]
A n” (☞ P.87).
USB Settings
A n
See “Changing the USB class [USB Settings]
A
n” (☞ P.88).
HDMI
A n
Set this when connecting the recorder to a TV to
play movie files.
[480p/576p] [720p] [1080i]:
• For details on connecting the recorder to a TV,
see
☞ P.56®
Notes
• When set to [1080i], 1080i format takes priority
for HDMI output. However, if this setting does
not match the input setting of the TV, the signal
format is changed first to [720p] and then to
[480p/576p]. For details on changing the input
setting of the TV, refer to the TV’s instruction
manual.
• When the recorder is connected to the
computer by the USB cable, do not connect the
HDMI cable to the recorder.
• The main LCD will be off when an HDMI cable is
connected to the recorder.
Reset Settings
A n
This returns the functions back to their initial
settings (factory default).
[Start]:
Returns the settings to their initial values.
[Cancel]:
Takes you back to [Device Menu].
• After resetting the settings, the time settings,
file numbers and folder name will be preserved,
will not return to their initial settings.
Menu settings after resetting (initial
settings):
Rec Menu:
[Mic Sense] [Low]
[Rec Mode] [PCM]
[44.1kHz/16bit]
[Rec Level] [Manual]
[Low Cut Filter] [Off]
[Self Timer] [Off]
[Rec Monitor] [On]
[Plug-inPower] [On]
[Input Jack] [Microphone]
[V-Sync. Rec] [Off]
Menu setting method
Menu setting method