Olympus LS-20M - Manual (Page 20)

20
1
EN
Power supply
Po
we
r s
u
p
p
ly
Charging by connecting to a computer
via USB
You can charge the battery by connecting to a
PC's USB port. When charging, be sure to correctly
place the rechargeable battery (supplied) into the
recorder (
☞ P.17).
2 Connect the USB cable to the USB port
of the PC.
1 Boot the PC.
3 Insert an SD card into the recorder
(
☞ P.27).
5 The charging process will start.
• The animation of the battery indicator is
displayed on the main LCD and the PEAK/
LED indicator light turns on.
. 6 Charging is completed when [Battery
Full] is displayed.
Charging time: approximately 2 hours *
* It shows the approximate time when
charging the rechargeable battery fully
from no remaining power at the room
temperature. The charging time will be
changed depending on the remaining
amount and the state of battery.
• Before connecting the USB cable, exit
HOLD mode (
☞ P.24).
• Charging will not start if an SD card is
not inserted.
4 While the recorder is during stop mode
or turned off, connect the USB cable to
the connecting terminal on the bottom
of the recorder.