Villaware FPVLFPSL01 - Manual (Page 7)

6
operating instructions
1. Your food processor features an extra wide chute so most vegetables such as smaller
onions and potatoes will not need to be cut into smaller pieces since they fit in the chute.
2. Prepare your vegetables by washing them thoroughly and peeling those that need the
skin removed.
3. Ensure the food processor and its accessories are clean by following the “cleaning” and
“maintenance” sections of this manual.
4. Make sure your food processor is properly assembled. Please follow the instructions from
the section “BEFORE USING YOUR FOOD PROCESSOR .” Before closing the food chute
lid, food can be placed in the food chute area if a disc is being used.
5. Plug the power cord into an electrical outlet and turn the power on selecting “ ” or Pulse
“ ”. The food chute lid must be locked in place for the unit to run.
6. Once the food processor is on, place the vegetables in the food chute and use the food
pusher to slowly drive them down.
7. By twisting the food pusher , it can be locked into the food chute so the pieces act as one
to push food down the food chute. If separate, the food pusher can be removed while
the unit is running to add liquids or smaller foods.
WARNING: NEVER USE HANDS OR FINGERS TO PUSH FOOD DOWN THE FOOD CHUTE
OR TO CLEAR THE FOOD CHUTE. ALWAYS USE THE FOOD PUSHER PROVIDED.
THE BLADES AND DISCS ARE EXTREMELY SHARP. USE CAUTION WHEN
HANDLING THEM.
CAUTION: Maximum running time for product is 3 continuous minutes.
USING CHOPPING BLADE:
1. Place the chopping blade over the drive shaft, rotating it slightly until it drops into place.
2. Attach the cover onto the bowl so that the food chute is in the front of the bowl (above
the switch control). Turn counter clockwise until the cover fits into place. The food chute
will be directly above and in line with the handle. Push down on the food pusher lid until
you hear it click , indicating that the cover is locked into place.
3. Plug the power cord into an electrical outlet.
4. Start processing by selecting “
” or PULSE ( ).
USING THE SLICING/SHREDDING /GRATING DISCS:
1. Place the attachment rod over the drive shaft rotating it slightly until it drops into place.
2. Select which disc to use according to recipe or taste.
3. Insert disc onto the attachment rod with the blade of your choice facing up since the discs are
reversible.
4. Attach the cover onto the bowl so that the food chute is facing to left side of the bowl.
5. Turn counter clockwise until the cover locks into place.
6. Load the food chute with ingredients before turning the food processor on. Always use the
food pusher to yield more evenly sliced or shredded foods.
7. Rest the food pusher in the food chute. Switch unit on “ ”. Holding the food pusher with one
hand, and food chute in the other , push gently down on the food pusher . When finished, press
control button to the off “ ” position before removing cover.