Villaware FPVLFPSL01 - Manual (Page 8)

7
after using your food processor
Before cleaning and storing your food processor , follow the instructions below to
disassemble the unit:
• Turn food processor off “ ” and unplug it from the electrical outlet.
• Release food chute lid by pressing outward on the latch.
• Turn clockwise to remove the cover.
• Remove processing accessory you were using holding it by the shaft. Do not touch blades
or sharp edges when emptying the bowl or removing accessories.
• Rotate the bowl to the left to release and then lift up to remove it from the base.
cleaning
THE BLADES AND DISCS ARE EXTREMELY SHARP. USE CAUTION
WHEN HANDLING THEM DURING CLEANING.
• Turn food processor off “ ” and unplug it from the electrical outlet.
• Disassemble all removable parts of the food processor. The chopping blade, discs and
attachment rod are dishwasher safe; select the minimum temperature and place on the
top shelf. Wash the other pieces by hand with warm, soapy water . If the residues dry
out in the chopping blade, discs, bowl or the cover , let it soak in warm, soapy water for
approximately 10 minutes before washing it.
• Wipe the motor base, including the drive shaft, with a damp or dry cloth.
• Do not immerse the motor base in water or any other liquid.
• Use a piece of kitchen paper with a little vegetable oil to remove some of the staining
resulting from certain foodstuffs, such as carrots.
• Cleaning the internal shaft of your chopping blade is most important . We suggest the use
of a small baby bottle brush to remove any food particles, then wash and dry the shaft
thoroughly.
• When hand washing, avoid soaking parts in detergent for too long.
• Read through the manufacturer’s instructions to verify that dishwashing detergents are
suitable for cleaning plastic items.
RESET FUNCTION:
1. The motor contains a resettable fuse to protect against overheating.
2. If the unit stops after continuous use the turn the food processor off
“ ” and unplug it from
the electrical outlet.
3. Wait for 5-10 minutes for the food processor to cool down.
4. Plug the food processor into the electrical outlet and resume normal use.
5. If the food processor does not operate after instructions 1 -4, repeat the above steps and wait
a further 10 minutes before using again.