I-View AnyNet-0401Mini Embedded NVR - Manual (Page 126)

126
Step 6.
Auto run Witness Pro program when power comes again: The system will auto start Witness Pro
when the power comes back. Click to locate “Witness Pro” from “Source” field.
Step 7.
Click “View logs” to view the status of “ezUPSCheck”.
Step 8.
Click “OK” to leave the setup window.
5-7.
ezMobileServer – MobileView Server
This function will show how to set up remote viewing the cameras in NVR via mobile phone. For the
detail setup and operation, please refer to “ezMobileServer Application” in Chapter 7-3.