I-View AnyNet-0401Mini Embedded NVR - Manual (Page 152)

152
There are the error messages shown as below when the synchronization is failed:
Fail (1): NVR not exist. Fail (2): User Account not exist on FreeView Pro.
Fail (3): ID Server connection failed
Fail (4): NVR Connection failed (Such as network failed)
Fail (5): Connection time out
Fail (101): NVR ID number error
Fail (102): Unauthorized user account of NVR
Section 3: Device selection and setup
The user can select the devices of the connected NVR Server and view the current status in
“Network Status” from e-Map connection screen.
Function description of the connection for group:
Section 1: Function Setup
Information: Set up the Group’s basic information.
Step 1.
Type the Group no for Group connection.
Step 2.
Type the Group name for Group connection.
Step 3.
Fill the notes in “Memo” field if needed.
1
2
3
4