I-View AnyNet-0401Mini Embedded NVR - Manual (Page 31)

31
are three categories including “System configuration”, “Video display configuration”,
“Connection ezDispatch Server setup”, “Save / Load configuration”, and “ezTools”.
11.
User access setup : Manage a list of users with different access privileges.
12.
Application logs : Review the user logins/logouts, motion detection records, video loss
occurrences, remote user accesses, hard disk failure events, etc.
13.
Peripherals setup : Set up new NVR peripheral devices for advanced system integration.
14.
Stop Alarm Siren : Click to stop a sounding alarm.
15.
Storage Configuration : Define the NVR video storage devices, fine-tune the compression
ratio and configure several video saving parameters.
16.
Public Address Configuration : This icon will be enabled when the PAC-800 Public
address server is connected to NVR. Setup the P.A. parameters and announce areas.
17.
Real-Time Display Switch : If your NVR model supported real-time display, you can
toggle the real-time display switch “on” and “off” at any time. Switch to the real-time display
mode when you are primarily viewing live video feeds. Turn it to “recording mode” to show
spilt videos on different monitors or "Text on video" when you integrate with POS & Access
Control System. (For CP-2160RD, CP-3160RD, CP-2320RD, and CP-3320RD only).
18.
Video display switcher : Click this tool bar to shown the Channel 33 - 64 videos
(analog /IP cameras) or all IP cameras when you using the 64 channels NVR or Hybrid NVR.
(Hybrid NVR) will show on the second monitor.
19.
Video Control Panel: On the right-hand side you have many display/recording control buttons,
several PTZ camera control buttons, a TV channel selection list and a visual e-Map utility tool.
Please refer to Chapter 4-13 for detail instruction.
20.
Hide The Toolbars: Press the “ESC” key of your keyboard to hide the toolbars and control panel.
Later, you will have to press on the “ESC” key to bring back the toolbars and control panel. If
you have previously set “auto log in” within the system configuration, you may have to press on
the “Alt-F4” or “Alt +I” key combination on your keyboard to bring up the login screen. This
will allow you to first log in as a user with administrative privileges, so as to be able to bring back
the toolbars and control panel.
Individual video channel attributes and functions:
To access the available video tools, right click one of
the video channels currently displayed to bring up a
small window shown as the picture.
Hide video: Blank out the currently selected
video channel from the main screen while any