I-View AnyNet-0401Mini Embedded NVR - Manual (Page 43)

43
The system allows detecting the illegal parking, please following the steps shown as below to
process of detection illegal parking.
Step 1.
Choice “Illegal parking” item from “ Select detection” drop box.
Step 2.
Setup the parameters for illegal parking detection.
• Choice the sensitivity level for the detection from 1 to 5 (1: Lowest; 5: Highest).
• Select the speed of buildup background.
• Choice “Scene change level” to suit for application area.
• Delay time: The trigger must be continued and longer than setting period, then the event is
valid.
• Stop recording: The video will keep on recording the period of setting after the trigger is
stopped. The setting number is zero, the video recording never stop when triggered.
• Highlight alert box: Check this function the detection frame will be flashed when
triggered.
Step 3.
Click “Detection area“ section, then flame and drag on the video image to select the
desired detection area by your mouse.
Step 4.
Click button to add the new selection.
Step 5.
To set up others detection areas, repeat step 3 and 4.
Step 6.
Entry the number of “ Width” and “ Height “ to select the desired detection object size.
Object detection setup: (Optional)
The system allows detecting the illegal parking, please following the steps shown as below to
process of detection illegal parking.
Step 1.
Choice “Object detection” item from “ Select detection” drop box.
Step 2.
Setup the parameters for illegal parking detection. The parameters function detection,
please refer to the illegal parking detection section.
Step 3.
Click “Detection area“ section, then flame and drag on the video image to select the
desired detection area by your mouse.
Step 4.
Click button to add the new selection.
Step 5.
To set up others detection areas, repeat step 3 and 4.
Step 6.
Entry the number of “ Width” and “ Height “ to select the desired detection object size.