I-View AnyNet-0401Mini Embedded NVR - Manual (Page 98)

98
b.) Limited recording day(s): The system will start to delete the oldest video clips when the
recorded videos are over the set period.
Raid HDDs status:
This tab will show on the screen when the NVR had been installed the Raid card. Click the “Raid
HDDs status “ tab will show the diagram widows as below for checking the Raid HDD status and
setting Raid card parameters.
Setup the RAID parameters:
1.
Please click
icon on the screen of System control panel or “Advance “ tab (You will see
the diagram as below) to setup the parameters when install new hard disks, replace fail HDD or
adjust the RAID parameters. Please follow up the process as below, and then entry the User
name /Password: RAID/hpt (default) to login for the RAID parameters setting.