LT Security LTD1651M5 User Manual
Page 14
Rear Panel
1. Power Input (from Adapter)
Connect the adapter to the DVR for DC power supply. (DC 12V/5.8A).
2. 16CH Video Input: 16 channel composite video inputs with BNC connectors
Since this DVR automatically detects video format (NTSC or PAL) as soon as power is
ON, NTSC or PAL video sources can be connected in DVR. But NTSC and PAL video
sources for 16CH video inputs can not be mixed. If they are mixed, DVR can’ not be
operated properly.
3. 16CH Loop through outputs: 16 channel composite video outputs with D-SUB
connectors. If the connection of loop-through video outputs into another video
equipments is requested, 16CH Loop-Through outputs can be utilized for it. If loop-
through video outputs will be connected to another video equipments, 75 Ohm
termination switch should be “OFF”. Then, another video equipments should be 75 ohm
terminated.
4. And 5. 16CH Audio input (RCA) and 2CH Audio Output (RCA)
Unbalanced audio signal input and output with RCA jack. Connect the audio source to
audio input, audio output to your amplifier because the DVR don’t amplify audio output.
A speaker with an amplifier will be needed for audio playback.. The audio input can be
from an amplified source or directly from a microphone.
2
3
5
4
6
7
1
9
8
11
10
12
9